EMC FLEX BLOG A site dedicated to Automotive EMC Testing for Electronic Modules

EV Wireless Charging (IEC 61980)

2. June 2015 18:22 by Christian in
IEC61980-1: Electric equipment for the supply of energy to electric road vehicles using an inductive

IEC61980-1: Electric equipment for the supply of energy to electric road vehicles using an inductive coupling - Part 1: General requirements

IEC 61980-2: Electric vehicle wireless power transfer (WPT) systems –Specific requirements for communication between electric road vehicle (EV) and infrastructure with respect to wireless power transfer (WPT) systems

IEC 61980-3: Electric vehicle wireless power transfer (WPT) systems –Specific requirements for the magnetic field power transfer systems.

Download my review for IEC61980-1 EMC applicable compliance standards:

IEC 61980_EMC_review.pdf (65.96 kb)


IEC 61980-1

TEST

PORT

TEST METHOD

INTERNATIONAL

STANDARD

Test Value

RF Level

CANADA

STANDARD

Immunity Requirements

Performance criteria are described in IEC 61000-6-1 and IEC 61000-6-2

Table 8 – WPT equipment immunity requirement – Environment other than residential

15.1

WPT system

Electrostatic Discharge

(ESD)

IEC 61000-4-2

(2008)

8kV/4kV

Air/Contact

CAN/CSA-IEC 61000-4-2:12

Radiated RF Fields

(80-1000MHz)

IEC 61000-4-3

(2002)

10 V/m

CAN/CSA-CEI/IEC 61000-4-3-07 (R2011)

Radiated RF Fields

(1.4-2GHz)

IEC 61000-4-3

3 V/m

CAN/CSA-CEI/IEC 61000-4-3-07 (R2011)

Radiated RF Fields (2-

2.7GHz)

IEC 61000-4-3

3 V/m

CAN/CSA-CEI/IEC 61000-4-3-07 (R2011)

Magnetic Fields

IEC 61000-4-8

100 A/m

CAN/CSA-IEC 61000-4-8:12

AC Power

input port

(and I/O

signal/control

connected

directly to

mains supply)

Electrical Fast

Transients/Bursts

IEC 61000-4-4

2kV (5/50ns,

100kHz)

CAN/CSA-CEI/IEC 61000-4-4-06 (R2011)

Voltage Surges

IEC 61000-4-5

2 KV line-to-line

4 KV line-to-earth

CAN/CSA-IEC 61000-4-5-08 (R2013)

Conducted RF Fields

(0.15-80MHz)

IEC 61000-4-6

10 V (rms)

CAN/CSA-C61000-4-6-09 (R2014)

Voltage dips and

interruptions

IEC 61000-4-11

(<16A)

IEC61000-4-34

(>16A)

30 % reduction for 25 cycles

60 % reduction for 10 cycles

>95 % reduction for 1 cycle

100% reduction for 250 cycles

CAN/CSA-CEI/IEC 61000-4-11-05 (R2014)

CAN/CSA-CEI/IEC 61000-4-34-06 (R2011)

Table 9 – WPT equipment immunity requirement – residential environment

15.1

WPT system

Electrostatic Discharge

(ESD)

IEC 61000-4-2

8kV/4kV

Air/Contact

CAN/CSA-IEC 61000-4-2:12

Radiated RF Fields

(80-1000MHz)

IEC 61000-4-3

10 V/m

CAN/CSA-CEI/IEC 61000-4-3-07 (R2011)

Radiated RF Fields

(1.4-2GHz)

IEC 61000-4-3

3 V/m

CAN/CSA-CEI/IEC 61000-4-3-07 (R2011)

Radiated RF Fields (2-

2.7GHz)

IEC 61000-4-3

3 V/m

CAN/CSA-CEI/IEC 61000-4-3-07 (R2011)

Magnetic Fields

IEC 61000-4-8

30 A/m

CAN/CSA-IEC 61000-4-8:12

AC Power

input port

(and I/O

signal/control

connected

directly to

mains supply)

Electrical Fast

Transients/Bursts

IEC 61000-4-4

1kV (5/50ns,

100kHz)

CAN/CSA-CEI/IEC 61000-4-4-06 (R2011)

Voltage Surges

IEC 61000-4-5

2 KV line-to-line

1 KV line-to-earth

CAN/CSA-IEC 61000-4-5-08 (R2013)

Conducted RF Fields

(0.15-80MHz)

IEC 61000-4-6

3 V (rms)

CAN/CSA-C61000-4-6-09 (R2014)

Voltage dips and

interruptions

IEC 61000-4-11

(<16A)

IEC61000-4-34

(>16A)

30 % reduction for 25 cycles

60 % reduction for 10 cycles

>95 % reduction for 1 cycle

100% reduction for 250 cycles

CAN/CSA-CEI/IEC 61000-4-11-05 (R2014)

CAN/CSA-CEI/IEC 61000-4-34-06 (R2011)

Disturbance Requirement

Load conditions

15.2.1.1

WPT system

Harmonic emission test

IEC61000-3-2

IEC61000-3-12

The test load shall enable the WPT system to operate between 20 % and 80 % of the rated power

 

flicker test

IEC61000-3-3

IEC61000-3-11

CAN/CSA-C61000-3-3:14

CAN/CSA-C61000-3-11-06 (R2011)

Operating conditions

15.2.1.2

WPT system

modes of operation

·       standby mode

·       active mode for emission

·       active mode for immunity

 

 

Disturbance limits

Limits and test conditions for disturbances in the low frequency (LF) range

Table 10 – Low frequency disturbances

15.2.2.2.2

AC Power

Harmonics

IEC 61000-3-2 (rated current

=< 16A/phase)

IEC 61000-3-12 (rated current

=< 75A/phase)

 

 

15.2.2.2.3

AC Power

Voltage Fluctuations and

Flicker

IEC 61000-3-3

(rated current

=< 16A/phase)

IEC 61000-3-11

(rated current

=< 75A/phase)

 

CAN/CSA-C61000-3-3:14

CAN/CSA-C61000-3-11-06 (R2011)

Limits and test conditions for disturbances in the radio frequency (RF) range

Table 11 – Radio frequency (RF) disturbances

15.2.2.3.2

AC Power

Conducted disturbances

(150kHz-30MHz)

CISPR 11

CISPR 11 Ed. 5 +am1 Table 6 (Class A) or Table 7 (Class B)

CAN/CSA-CEI/IEC CISPR 11-04 (R2013)

15.2.2.3.3

Telecommunication

Lines

Conducted disturbances

(150kHz-30MHz)

CISPR 32

CISPR 32

Table A.10 (Class A) or

Table A.11 (Class B)

 

15.2.2.3.4

WPT system

and enclosure port

Radiated

Disturbances

(150kHz-30MHz)

CISPR 11

Table 12

CAN/CSA-CEI/IEC CISPR 11-04 (R2013)

15.2.2.3.5

WPT system port

Radiated disturbances

(30MHz-1GHz)

CISPR 11

CISPR 11

Table 9 (Class A) or Table 11 (Class B)

CAN/CSA-CEI/IEC CISPR 11-04 (R2013)

 

 

 

 

 

 

WPT equipment immunity requirement

Annex B

B.2

WPT with EV

Radiated RF Field

(20–2 000 MHz)

ISO 11451-2

30 V/m

 

Radio frequency (RF) disturbances

Annex B

B.3

B.4

 

WPT system with EV

Radiated disturbances

(30MHz - 1GHz)

CISPR 12

limit of clause 4

CAN/CSA-CISPR 12-10 (R2014)

Protection from electro-magnetic field

Annex C

C.1.3

 

WPT system with EV

EMF measurement procedure

IEC 61786-1

IEC 61786-2

IEC 62233

 

 

IEC 61786-1: Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments

IEC 61786-2: Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 2: Basic standard for measurements

IEC 62233: Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure


Christian Rosu

Comments are closed